Overview of Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT)
Parameters of Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT
The diamond V-scoring blade is designed to provide high cutting speed and accuracy on ferrous metals like copper, gold, silver, or iron. It uses diamond fibers to increase the surface roughness of the metal, which can improve its resistance to wear and tear.
For PCB V-CUT applications, the diamond V-scoring blade can be used to cut through the metal using the V-shaped profile of thePCB board. This means that it cuts with precision and minimal error when removing the material from the board.
In terms of parameters, the diamond V-scoring blade is typically configured to have a blade length of 15-20 inches, a blade diameter of 0.8-1 inch, a work life of up to 3 minutes, and a tip angle between -60 and +60 degrees.
It’s important to note that the performance of the diamond V-scoring blade will depend on various factors such as the material being cut, the type of metal being used, and the thickness of the metal. Additionally, if the blade is damaged or worn out, it may not provide optimal results. Therefore, it’s essential to follow proper care and maintenance practices to ensure maximum performance.
(Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT)
Applications of Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT
Q: How is Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT manufactured?
A: Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT recyclable?
A: Yes, Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT compare to steel in terms of hardness and toughness?
A: While Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(Diamond V-Scoring Blade for PCB V-CUT Tungsten Carbide V-Scoring Blade for PCB V-CUT V-Cutters V-knifes Cemented Carbide V-CUT)
