Overview of 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing)
Parameters of 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing
The dimensions of the tungsten steel YG8 carbide rotary burleaser tool described in your request refer to its head diameter and radius.
For a deburring polisher with a head diameter of 6mm, it would need a burlyhead length of approximately 4.5 inches (12 cm). This is equivalent to 3.79 meters (11.42 feet).
To find the appropriate deburring angle for your specific application, you may want to use a formula that takes into account both burlyhead length and direction of the deburring curve:
angle = √(d/b)
where:
– d: deburring length
– b: deburring direction
If you’re not familiar with this formula, or if you need more guidance on how to calculate the angle based on the given head diameter, it might be helpful to consult with a deburring expert or experienced automotive engineer who can help you with the calculation.
(10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing)
Applications of 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing
Q: How is 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing manufactured?
A: 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing recyclable?
A: Yes, 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing compare to steel in terms of hardness and toughness?
A: While 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is 10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(10 Tungsten Steel YG8 Carbide Rotary Burr 6mm Head Dia. for Deburring Polishing)
