Title: The Ultimate Guide to lubricating Your Carrevolver Cases with Carbide Dies
(Lubrication Logic: Do You Need to Lubricate Straight Wall Revolver Cases with Carbide Dies?)
Do you want to revolutionize your car reviver case? If so, it’s time to switch up your lubrication strategy! With carbide dies, carrevivers have become a breeze for those who prefer to keep their engines at maximum performance. In this article, we’ll guide you through the process of lubricating your carbide die cases.
First things first, make sure that your carbide dies are new and not expired. This is essential since the wear of the die can affect its lifespan. Once you’ve purchased the carbide die, replace it with a new one whenever possible.
Once you have your carbide die ready, follow these steps:
1. Turn off the engine: Before lubing the carbide die, turn off the engine completely. This will prevent any damage to the die during the lubrication process.
2. Apply the lubricant: Place a droplet of lubricant onto the carbide die face. Make sure to apply evenly and consistently throughout the entire die face.
3. dry the die: Use a clean cloth to wipe away any excess lubricant from the die. It’s important to do this before applying any other type of lubricant.
4. Unapply the lubricant: After drying the die, unapply the lubricant by carefully removing it using a pair of pliers or circular tools.
5. Apply the lubed die: Apply the lubricant to the carbide die face, making sure to cover the entire die.
6. Check for any burrs or play on the die: If there are any burrs or play on the die, use a finger to gently tap them out. If the burrs or play continue, stop lubing and replace the die with a new one.
7. Remove the lubricant: Once the carreviver case has been lubed, remove it from the engine by removing the jaw plate. Be careful not to impact the die while doing so.
(Lubrication Logic: Do You Need to Lubricate Straight Wall Revolver Cases with Carbide Dies?)
By following these steps, you can achieve maximum performance from your carbide die cases. Remember, always consult the owner manual for specific instructions on how to lubricate your vehicle’s carbide die cases.
Inquiry us
if you want to want to know more, please feel free to contact us. (nanotrun@yahoo.com)