Overview of Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod)
Parameters of Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod
The specified parameters for oil field drill bit use in a tungsten carbide composite welding rod, including one inch 1/8-inch and three inches 3/16-inch tungsten carbide bars with a component length of 20 inches:
1. Tungsten carbide bars: The selection of tungsten carbide bar should be based on the desired grade and material strength required. A higher grade tungsten carbide bar will provide better resistance to wear and tear over time.
2. Component length: The component length of the welding rod should be equal to or greater than the recommended factor to achieve optimal performance and durability.
3. Net length: The net length of the welding rod should be measured from the end to the beginning and not the middle.
4. Thread type: The thread type used in the drilling bit should match the intended thread direction and be compatible with the piece being drill.
5. Tungsten carbide surface: The tungsten carbide surface should be clean and free of impurities that may interfere with the chemistry of the wire.
6. Bearden angle: The bearden angle should be within a tolerance of 5 degrees and no more than 15 degrees. This will ensure that the bits are evenly distributed throughout the wire.
7. Steel core: The steel core should be provided with adequate pressure to provide the necessary strength and endurance to the wire.
Overall, the above mentioned parameters can help optimize the performance of the oil field drill bit and ensure a high-quality welding rod for the application.
(Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod)
Applications of Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod
Q: How is Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod manufactured?
A: Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod recyclable?
A: Yes, Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod compare to steel in terms of hardness and toughness?
A: While Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(Oil Field Drill Bit Use 1/8-3/16inch Tungsten Carbide Composite Welding Rod)
