Overview of YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools)
Parameters of YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools
The YT5 peeling mold tungsten carbide planing mold strip has been designed with a high degree of oxidation protection, which helps to prevent the loss of metal powder and improve its overall appearance and functionality in subsequent applications.
Here is an example of how you can use this model:
1. Install the planing mold on a clean surface: Make sure that the planing mold is properly installed on a flat, level surface, such as a solid block or a piece of rough material.
2. Connect the planing mold to the jaw in the tool: Double-check that the tool’s jaws are properly adjusted and the jaw is connected to the planing mold according to the manufacturer’s instructions.
3. Apply the planing mold strip: Preheat the tool to the recommended temperature for the planing mold, then apply the planing mold strip to the surface where you want it to be applied. The strips should cover at least 80% of the surface.
4. Fitting the substrate: Once the planing mold is fully covered by the strip, you can fit the substrate onto the surface using the appropriate tools. Ensure that the substrate is evenly distributed throughout the strip and smooth enough to adhere well.
5. Allow the substrate to cure: After fitting the substrate onto the surface, let it cure according to the manufacturer’s instructions.
6. Finish up: Check the finish of the substrate by marking it with a pencil or using a brand-new spatula. If the substrate looks excellent, the planing mold should be fully coated with the oxidation layer.
7. Do not touch the planing mold while operating: Wear gloves or protective clothing when working with the planing mold, especially if it comes into contact with sparks, rough surfaces, or other hazards.
By following these steps, you can ensure that the planing mold is protected from, improving its overall performance and its lifespan.
(YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools)
Applications of YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools
Q: How is YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools manufactured?
A: YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools recyclable?
A: Yes, YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools compare to steel in terms of hardness and toughness?
A: While YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(YT5 Peeling mould tungsten carbide planing mold strip the oxide layer decoating ID scarfing tools)
