In recent years, carbide was replaced by niobutyl oxide (NBO) in the design of saw blades due to its greater strength and better durability than steel. However, for those who prefer a more traditional look and feel on their saws, there is still a carbide tip table saw blade available.
(How To Sharpen A Carbide Tip Table Saw Blade)
One way to sharpen a carbide tip table saw blade is through the use of diamondpaper. This method works by using a small amount of diamond grit to remove any dull or wear-resistant surface on the blade. The diamond grit should be at least 180 abrasive to prevent it from scratching against other surfaces.
To use diamondpaper on a carbide tip table saw blade, you will need a few materials: one honing disc, a saw blade, a power saw, and a crosscut plraseer. You can also purchase diamond gritting paste that specifically designed for carbon dioxide-based tools like carbide tips.
To start, take the honing disc out of the bag and place it on the cutting board. Carefully press down on the honing disc to remove any marks or grooves. Then, slide the saw blade over the honing disc and gently cut along the edge. Use a circular motion to smooth the blade across the surface of the carbide, starting from the bottom left corner and working your way up towards the top right corner.
It’s important to note that diamond gritting is only effective on surfaces with a rough surface, such as fibrous or composite materials. If you are working with harder surfaces, you may want to consider using a blade or similar material.
Once the honing disc has been removed, use the saw blade to apply pressure to the honed disc to make it even smoother. Start with a light touch and work your way up to a heavier pressure. It’s important not to apply too much pressure at once, as this can cause the blade to become too hot and cause damage to the.
After applying the pressure, clean the honed disc with warm water and dry it off completely before using it again.
(How To Sharpen A Carbide Tip Table Saw Blade)
Using a carbide tip table saw blade is a great option if you are looking for a professional-quality tool that will last for many years to come. Just remember to always follow the manufacturer’s instructions for cleaning and sharpening the blade to ensure its longevity.