Overview of K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making)
Parameters of K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making
The parameters of the carbide (Vsi) crushing unit, such as its cone design and feed size, will depend on the type of carbide being used and the material being crushed. Here is an example of how some of these parameters might vary:
*cone design: A larger cone can extract more particles from the material being crushed, which can be useful in large-scale grinding applications.
* feed size: A smaller feed size will allow more material to be efficiently crushed, but it may also require more energy to operate and increase waste.
* speed: The rate at which the material is being crushed can have an impact on the amount of material that is extracted and the overall efficiency of the equipment.
It’s important to consult with a professional to determine the most appropriate parameters based on your specific needs and operating conditions.
(K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making)
Applications of K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making
Q: How is K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making manufactured?
A: K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making recyclable?
A: Yes, K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making compare to steel in terms of hardness and toughness?
A: While K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(K20 K10 Tungsten Carbide VSI Crusher Carbide TC Strips /tungsten carbide flat for sand making)
