Overview of Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod
Tungsten Carbide (WC) is a hard, brittle, and corrosion-resistant material composed of equal parts tungsten and carbon atoms. It is a popular member of the cemented carbide family, known for its incredible hardness, strength, and thermal stability. Tungsten carbide is often used in industrial applications requiring high wear resistance and the ability to maintain sharp edges, even under extreme conditions.
Features of Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod
-
Exceptional Hardness: With a Mohs hardness of 9.0 to 9.5, tungsten carbide is one of the hardest materials available, second only to diamond.
-
High Density: Its density ranges from 14.5 to 15.6 g/cm³, providing substantial mass in a small volume, beneficial for applications like balancing and weighting.
-
Thermal Stability: Retains its hardness up to temperatures around 1000°C, making it suitable for high-temperature applications.
-
High Young’s Modulus: Possesses a high modulus of elasticity, indicating stiffness and resistance to deformation under load.
-
Brittleness: Although extremely hard, tungsten carbide is also brittle, requiring careful handling to avoid chipping or fracturing.
-
Chemical Resistance: Resistant to corrosion from most acids except for hydrofluoric acid and strong alkalis, and is not attacked by most organic materials.
(Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod)
Parameters of Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod
The number of cubic centimeters in the each set of parameters is 10:1, which means that each blank has approximately 10% of one tungsten carbide rod as its material.
Another important parameter is the percentage content of tungsten and carbon in the set of parameters. A high percentage of tungsten will result in a more aggressive finish on the set of parameters.
Finally, the maximum temperature for casting can be determined by multiplying the number of hours used for casting by the desired temperature in Celsius (428°C).
It’s important to note that this information should not be taken as the only factor when determining the quality of a set of parameters. Other factors such as proper care and follow-up procedures, along with the accuracy and consistency of the set of parameters, also play an important role in determining the final product.
(Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod)
Applications of Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod
-
Cutting Tools: Used in the manufacture of drills, milling cutters, and other metal-cutting tools due to its hardness and heat resistance.
-
Mining and Construction: For drill bits, saw tips, and wear parts in earthmoving equipment due to its exceptional wear resistance.
-
Jewelry: Provides a durable and scratch-resistant alternative to precious metals in rings and other jewelry items.
-
Ballistic Applications: Used in armor-piercing ammunition and protective plates due to its hardness and density.
-
Dies and Punches: In the forming of other metal parts in stamping and punching operations due to its wear resistance and ability to hold a sharp edge.
-
Oil and Gas Drilling: As components of drill bits and wear parts in drilling equipment due to its toughness and resistance to abrasion.
Company Profile
MyCarbides is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality carbides and relative products.
The company has a professional technical department and Quality Supervision Department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.
If you are looking for high-quality carbide materials and relative products, please feel free to contact us or click on the needed products to send an inquiry.
Payment Methods
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment
It could be shipped by sea, by air, or by reveal ASAP as soon as repayment receipt.
FAQs of Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod
Q: How is Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod manufactured?
A: Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod is typically produced by mixing tungsten carbide powder with a binder metal (commonly cobalt), pressing the mixture into shape, and then sintering it at high temperatures to form a solid, tough material.
Q: Is Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod recyclable?
A: Yes, Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod is highly recyclable. Scrap and worn-out tungsten carbide tools can be collected, reground, and reused or reprocessed back into tungsten carbide powder.
Q: How does Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod compare to steel in terms of hardness and toughness?
A: While Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod is much harder than steel, making it suitable for cutting and drilling harder materials, it is less tough, meaning it is more prone to chipping or breaking under impact compared to steel.
Q: Can Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod be machined easily?
A: No, due to its extreme hardness, tungsten carbide is very difficult to machine using conventional methods. It often requires specialized grinding or electrical discharge machining (EDM) techniques.
Q: Is Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod dangerous to health?
A: In its solid form, tungsten carbide is generally safe to handle. However, during grinding or machining, dust containing tungsten carbide and cobalt binder can be released, which can be hazardous if inhaled. Proper protective measures are necessary.
(Solid tungsten carbide and cermet rods blanks cemented tungsten carbide rod)
